RS 6 V8-4.2L Turbo (BCY) (2003)
/Page-3290002.png)
11. Cap
12. Sealing plugs
13. Supply hose
^
From brake fluid reservoir to clutch master cylinder
14. Bulkhead
Fig. 1 Adjusting ball head
For Left Hand Drive (LHD)vehicles:
A= 159 mm + 05 mm
For Right Hand Drive Vehicles (RHD):
A= 1732 mm + 05 mm
Note:
^
When measuring, ball head must be at a right angle to surface of the brake booster.
^
Measure to end of ball head without seal.
