RS 6 V8-4.2L Turbo (BCY) (2003)
Coolant Line/Hose: Service and Repair
Oil Filter Bracket Coolant Pipe, Removing and Installing
Oil filter bracket coolant pipe, removing and installing
Removing
-
Remove engine.
-
Remove front right exhaust pipe.
-
Remove right exhaust manifold.
-
Unscrew bolts -2- and -4- and move oil supply pipe to side.
-
Unscrew bolts -1- and -3-.
-
Detach coolant pipe to oil filter bracket from connecting hose (arrow).
Installing
Install in reverse sequence; note following points:
Notes:
^
Replace gaskets.
^
Secure all hose connections with correct hose clamps (same as original equipment), Refer to Part Supplier.
-
Install right exhaust manifold.
-
Install front right exhaust pipe.
-
Install engine
Tightening torques