RS 6 V8-4.2L Turbo (BCY) (2003)
Camshaft: Service and Repair
Camshaft and Adjuster - Right Cyl. Head, Removal & Installation
Camshafts and camshaft adjuster - right cylinder head, removing and installing
Note: There are fundamental differences between procedures for installing timing chain on left cylinder head and right cylinder head. Observe
different procedures.
Special tools and equipment
^
3366 Retainer for chain tensioner
^
Sealant:, Refer to Parts Supplier
Removing
-
Remove engine
-
Remove toothed belt.
-
Remove camshaft sprocket.
-
Unscrew idler wheel (arrow).
-
Remove bolts -1- and -2- and take off rear toothed belt guard.
-
Unplug electrical connector (arrow) from Camshaft Position (CMP) Sensor 1 -G40-.
-
Remove Hall sender housing.
-
Remove Hall sender rotor and washer.