RS 6 V8-4.2L Turbo (BCY) (2003)
Oil Pan: Service and Repair
Lower Section of Sump, Removing and Installing
Lower section of sump, removing and installing
Auxiliary material required
^
Drip tray
^
Electric drill with plastic brush attachment
^
Protective goggles
^
Silicone sealant, Refer to Parts Supplier.
Removing
-
Release fasteners -1- to -4- and take off noise insulation.
-
Place a drip tray underneath.
-
Drain engine oil.
-
Unplug electrical connector at Oil Level Thermal Sensor -G266- -item 1-.
-
Unbolt lower section of sump (arrow).
Installing
Note: Replace seals.
-
Remove sealant remaining on lower and upper sections of sump (with rotating plastic brush or similar).
WARNING: Wear eye protection