RS 6 V8-4.2L Turbo (BCY) (2003)
Front Crankshaft Seal: Service and Repair
Crankshaft oil seal - pulley end, replacing
Special tools and equipment
^
Thrust piece T40007
^
Oil seal extractor T40019
Removing
-
Remove lock carrier, Refer to Body and Frame
-
Remove toothed belt, Refer to Timing Belt
-
Remove central bolt -2- for crankshaft sprocket -1-.
-
Remove toothed belt sprocket.
-
Adjust inner part of oil seal extractor T40019 so that it is flush with outer part and lock in position with knurled screw.
-
Lubricate threaded head of oil seal extractor, place it in position and exerting firm pressure screw it as far as possible into oil seal.