RS 6 V8-4.2L Turbo (BCY) (2003)
/Page-1525004.png)
-
When inserting, the bracket for the torque support remains installed. The locking pin can be guided through a hole in the bracket to be inserted into
the holes in the tensioner.
-
The toothed belt tensioner is oil-dampened. Compress it by slowly applying constant pressure.
-
Before removing the ribbed belt, mark the running direction with chalk or felt tip marker. A reversed turning direction can cause damage to the
used toothed belt.
-
Loosen bolt -arrow- of eccentric pulley.
-
Loosen the bolts on both camshaft sprockets approximately two turns. Counterhold it using the (3036) while doing this.
-
Remove left and right camshaft gears from cone using (T40001 ) with (T40001/2).
