RS 6 V8-4.2L Turbo (BCY) (2003)
Display:
-
On the display press the button "jump" -arrow-.
Display:
-
On the display press the button "end" -arrow-.
-
Press button "end" in menu end.
-
Switch OFF ignition and detach diagnostic connector.
Note:
The VAS 5051 must remain connected to check the adaption values and possibly for the exhaust emission investigation. See: Adaptation
Values: Checking or Changing/Table For Channels and Adaption Values
-
Switch ignition ON.
After switching ON the ignition no service interval is displayed on the display of the distance counter in the dash panel insert.