RS 6 V8-4.2L Turbo (BCY) (2003)
-
145 Nm (106 ft lb)
9
Seal
-
Replace if necessary
-
Install dry into fuel tank opening
10
Closing flange
-
For fuel delivery module
-
Not available as replacement part
-
Note arrow markings when installing
11
Fuel pump module
-
with Fuel Pump (FP) -G6-
-
Different versions,
-
Only replaceable with catch flange
-
Checking fuel pump
-
Checking fuel pump - vehicles with 8-cylinder-Turbo engine
-
Checking - vehicles with 8-cylinder Turbo engine
-
Pressure checking.
12
O-rings
-
Always replace
-
Check installation position
13
Fuel return line
-
To remove fuel pump module, disengage distributor connector and disconnect return line at distributor connector -item 1- while pressing
fastening tabs
14
Fuel filter screen
-
Cannot be replaced as single part
-
Clean if dirty
Fig. 1 Release harness connector
-
Before disconnecting harness connector at fuel pump delivery module, release harness connector. This can be done by hand or using a screw
driver -arrow-
Fig. 2 Unblocking return pipe