RS 6 V8-4.2L Turbo (BCY) (2003)
/Page-1253003.png)
-
Drain plug with sealing ring must be replaced.
-
Tighten new drain plug - 1 - to 12 Nm.
Filling transmission with ATF
-
Remove ATF inspection plug - 2 - .
-
Guide filler hook of ATF filler tool V.A.G 1924 into an opening - arrow - of protective cap, while doing so, do not push cap up and in.
-
Add ATF using ATF filler tool V.A.G 1924 until ATF exits from check hole.
-
Place selector lever in position "P" .
-
Start engine and allow it to run at idle.
-
Continue to add ATF using ATF filler tool V.A.G 1924 until ATF exits again from check hole.
-
Tighten ATF inspection plug.
-
With engine idling, depress brake pedal and shift selector lever through all selector lever positions, leaving selector lever in each position for at
least 10 seconds.
-
Place selector lever in position "P" .
-
Check ATF level ATF level.
