RS 6 V8-4.2L Turbo (BCY) (2003)
Fuel Level Sensor: Service and Repair
Fuel Supply Sensor 3 -G237-, Removing and Installing (AWD)
Fuel Supply Sensor 3 -G237-, Removing And Installing
Special tools, test equipment and auxiliary items
-
2012 A Wrench
Removing
-
For removing the filler neck with expansion tank, the fuel tank should not be over 1/4 full. If necessary, empty fuel tank.
CAUTION: After reconnecting vehicle battery on vehicles equipped with Audi Telematics by OnStar(R), switch-on the emergency (back-up) battery for
the Telematic/Telephone Control Module.
-
Vehicles with coded radio/navigation system (RNS) coding, refer to the Owner's Manual if necessary.
Audi A6:
CAUTION: Before disconnecting the battery, determine the correct coding for the anti-theft radio.
-
Remove cover above battery -arrows-.
NOTE: On vehicles without battery cover: Remove plenum cover.