RS 6 V8-4.2L Turbo (BCY) (2003)
Fuel Gauge Sender: Locations
Fuel Sender With Fuel Pump -G6-, Component Overview (AWD)
Component Overview Fuel Sender With Fuel Pump -G6 - All Engines (AWD)
1
Distributor connector
-
Fastened with 3 tabs to accumulator
-
To remove, move toward left to disengage tabs
-
When installing, attach fuel hose to accumulator
-
When removing fuel pump module, remove distributor connector to make it possible to remove return line from closing flange
-
Different versions
2
Accumulator
-
With pump
3
Wiring inside tank
-
To fuel level sensor 2 -G169-
-
Install at closing flange
4
Electrical wire
-
To sender for fuel gauge -G-
-
Install at closing flange
5
Harness connector
-
For fuel pump and all senders for fuel gauges
-
To release, see Fig. 1
6
Fuel return line
-
Attached to front part of fuel tank
-
Mark line before removing
7
Fuel pressure line
-
To fuel filter
-
Attached to front part of fuel tank
-
Mark line before removing
8
Closing ring
-
Remove and install using 3087 wrench