RS 6 V8-4.2L Turbo (BCY) (2003)
/Page-2524001.png)
Throttle Cable/Linkage: Service and Repair
Accelerator Pedal (AP) Cable, Servicing - Vehicles With Mechanical Accelerator Mechanism
Accelerator pedal cable, removing and installing
CAUTION:
-
The accelerator pedal cable can kink very easily. Be very careful when handling the cable during installation.
-
A single small kink can cause the cable to break while driving.
-
An accelerator pedal cable that has been kinked should be discarded
NOTE: When installing the accelerator pedal cable, make sure that it is properly aligned between the supports and attachment points.
Removing
-
Remove driver's side storage shelf.
-
Disconnect accelerator pedal cable end -1- at top of accelerator pedal -2-.
-
Pull rubber gasket off toward front -arrows-.
-
Remove plenum chamber cover -1- toward front.
-
Remove engine cover -arrows-.
