RS 6 V8-4.2L Turbo (BCY) (2003)
`
WARNING: Do not re-use screws - 2 -. Replace self-tapping screws with the M5 bolts and nuts supplied.
Drill out mounting holes to 5.5 mm.
Tightening torque: 5.5 Nm (49 in.lb).
NOTE: To give a clear illustration, anti-squeak pad is not shown.
-
Carefully unclip side airbag - 1 - at retaining hook - 5 -.
-
Remove side airbag - 1 -.
-
Set down airbag unit with impact cushion facing upward.