RS 6 V8-4.2L Turbo (BCY) (2003)
Wheel Speed Sensor: Service and Repair
Front ABS Wheel Speed Sensor, Removing and Installing
ABS wheel speed sensor, removing and installing
Removing
-
Loosen wheel bolts.
-
Raise vehicle.
-
Remove wheel.
-
Remove grommet -1- from the wheel housing.
-
Disconnect ABS wheel speed sensor harness connector -2-.
-
Disconnect ABS wheel speed sensor wiring from retainers (arrows).
-
Remove ABS speed sensor from wheel bearing housing.
When installing pay particular attention to the following points:
-
Replace clamping sleeve.
-
Before installing speed sensor, install sealing collar.
-
Connect ABS wheel speed sensor wiring and fasten grommets into retainers.
-
Turn wheels completely to left and right stop positions and check ABS wheel speed sensor wiring clearance.