RS 6 V8-4.2L Turbo (BCY) (2003)
-
Cut out first area of adhesive.
-
Move winding device as shown and attach relay pulley in lower corner of rear window.
-
Route cutting cord as shown.
-
Cut out adhesive up to point where cord no longer runs in relay pulley.
-
Remove relay pulley and continue to cut adhesive.
-
Move winding device as shown and attach relay pulley in upper corner of rear window.
-
Route cutting cord as shown.
-
Cut out window glass up to point where cord no longer runs in relay pulley.
-
Insert VAG1474/12 protective foil between rear window and molded headliner.