RS 6 V8-4.2L Turbo (BCY) (2003)
Back Window Glass: Service and Repair
Rear Window, Installing
Rear Window, Installing
-
When installing new rear window, clean and prime adhesive surface as previously described for installing windshield.
-
When reusing an old, undamaged rear window, apply adhesive directly on old adhesive bead after cutting back remaining material.
-
Glue spacer onto window flange at top or onto rear window at bottom.
-
Note different spacers used for insulating glass and standard glass.
-
Observe mounting marks on rear window and cover strip.
-
Glue on adhesive stopper profile - 2 - at distance - a - = 10 mm (0.394 in.) from rear window seal - 1 -.
-
Glue spacers onto rear window according to markings.
Pay attention to different heights for insulating glass and standard glass.
NOTE: Any adhesive sealing material emerging at the lower edge of the rear window when inserting the window into the window opening must be
removed immediately.