S4 V8-4.2L (BHF) (2004)
Garage Door Opener Transmitter: Service and Repair
Garage Door Opener Control Module J530 - Through 10.04, Removing and Installing
Garage Door Opener Control Module J530 - Through 10.04, Removing And Installing
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
Removing
-
Remove front bumper cover.
-
Remove bolt - 2 - and disengage retainer.
-
Remove module -1 - from bumper cover.
-
Disconnect electrical connection.
Installing
Install in reverse order of removal, noting the following:
-
Install front bumper cover.