S4 V8-4.2L (BHF) (2004)
Radio/Stereo: Service and Repair
Radio Head Unit "Concert II", Removing and Installing
Radio Head Unit "Concert II", Removing And Installing
Special tools, testers and auxiliary items required
-
Radio release tool T10057
1mNOTE: Should radio head unit require replacement, follow applicable component "Replacement" procedure using VAS 5051/5051 in operating
mode "Guided Fault Finding"
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
Removing:
-
Insert radio release tools T10057 -as illustrated - into slots until they engage. Pointed ends of grips must face outwards.
-
Grasp hold of tool grips and pull radio head unit out of instrument panel.
-
Disconnect electrical connections.
-
Remove release tools from radio.
Installing:
-
Connect electrical connections and antenna cable.
-
Slide radio head unit carefully into instrument panel and engage in mounting frame.