S4 V8-4.2L (BHF) (2004)
-
Place electric wiring or wiring for central locking system - 2 - into lower retainer of cable guide at cover - 1 -.
-
Insert trim - 1 - for lid hinge on long hinge lever at bottom and clip in audibly toward top onto hinge lever.
-
Engage clip - 3 - on trim into hinge lever.
Removing and installing rear lid hinges
NOTE: For easier adjustment of the rear lid hinges, use gradations marked on the hinges.
Removing
-
Loosen nut - 1 -. Tightening torque 21 Nm
-
Unscrew nut - 2 -. Tightening torque: 21 Nm
-
Lift off lid from hinge.
-
Remove bolts - 3 - and - 4 -. Tightening torque: 21 Nm
-
Only loosen center bolt - 5 -. Tightening torque: 21 Nm
-
Remove hinge - 6 -.
-
Installation is performed in the reverse order of removal.
Gas-filled strut, removing and installing
NOTE: When removing or installing the gas-filled strut, push back the opened rear lid only slightly so as to avoid damaging components.