S4 V8-4.2L (BHF) (2004)
1
-
Center console
-
Removal:
-
Remove center armrest.
-
Remove cover at selector lever.
-
Remove the radio.
-
Remove A/C control head E87.
-
Remove button trim - 2 -.
-
Pull up parking brake firmly.
-
With automatic transmissions, position selector lever all the way back.
-
At the front inside footwell, remove the covers - 4 - on right and left sides at the center console side.
-
Remove bolts - 3 - at the front inside footwell on right and left sides at the center console side.
-
Remove parking brake lever handle.
-
Remove parking brake lever trim.
-
Carefully remove cover - 5 - from center console, starting at front.
-
Remove two Phillips-head screws - 7- on connecting piece - 6 - and remove connecting piece. Otherwise, trim cannot be pulled away
above parking brake lever.
-
Remove front ashtray.
-
Remove cigarette lighter.
-
Remove navigation control head.
-
Remove screws - 8 to 10 -.
-
Vehicles with center armrest: Remove hex-combination nut - 11 -.
-
Remove two hex-combination nuts - 12 -.
-
Pull center console forcefully backward and remove it from vehicle.
NOTE: Center console may be removed from the diecast part on the instrument panel only with difficulty.
-
Installing:
Installation is reverse of removal.
2
-
Switch trim
3
-
Screws, (2x)
-
Tightening torque 5 Nm
4
-
Cover (2x)