S4 V8-4.2L (BHF) (2004)
-
Secure camshaft position sensor wheel on camshaft adjuster of intake camshaft of right cylinder head using setting gauge T40047.
-
Place setting gauge T40047 on bolt - 2 -.
-
Tighten camshaft bolt - 1 - on intake camshaft to final tightening torque.
^
Tightening torque: 100 Nm plus 1/4 turn (90°).
-
Remove setting gauge T40047.
-
Tighten camshaft bolt - 2 - on exhaust camshaft of right cylinder head to final tightening torque.
^
Tightening torque: 100 Nm plus 1/4 turn (90°).
-
Remove crankshaft holder 3242.
-
Using key T40049 turn crankshaft two complete turns in direction of engine rotation - arrow - until crankshaft stands at TDC again.