S4 V8-4.2L (BHF) (2004)
Fuel Gauge Sender: Connector Locations
Fuel Level Sensor G, Fuel Level Sensor 2 G169 - Quattro, Multi-pin Connector Assignments
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
Preparations
-
Remove rear seat bench.
Fuel Level Sensor G
-
Remove screws - arrows - and remove right access panel.
-
Carefully release and disconnect 4-pin connector - arrow - (right-side).
Assignment of 4-pin connector at fuel level sensor.
1. Fuel pump positive ( + )
2. Sensor to fuel gauge
3. Sensor Ground (GND) ( - )
4. Fuel pump Ground (GND) ( - )
Fuel Level Sensor 2 G169