S4 V8-4.2L (BHF) (2004)
Fuse Block: Service and Repair
Main Fuse Panel, Removing and Installing
Main Fuse Panel, Removing And Installing
Removing
-
Disconnect battery.
-
Remove rubber seal of plenum chamber cover in direction of - arrow-.
-
Remove plenum chamber cover -1 - to front.
-
Fold cover - 2 - aside and remove nut - 3 - at terminal.
-
Remove nut -1 - for fuse (positive terminal).
Installing
Install in reverse order of removal, noting the following:
-
Reconnect battery.
Tightening torques
Component - fastener
NM
Fuse panel to positive terminal - nut
6
Fuse to fuse panel terminal - nut
6