S4 V8-4.2L (BHF) (2004)
-
Remove bolts - 1 - and - 2 -.
-
Loosen hose clamps - arrows - and remove right coolant pipe from coolant hoses.
-
If necessary, remove engine support bridge to remove coolant pipe.
Installing
Installation is performed in reverse order of removal. Note the following:
Note:
^
Secure all hose connections using hose clamps appropriate for the model type
^
During installation, reinstall all cable ties at the same locations.
Engine code BHF
-
Secure fuel hose to connection on fuel rail pipe by counterholding using an open-end wrench at each hex head - 1 - and - 3 - and tightening union
nut - 2 - to 22 Nm.
All:
-
Install lock carrier with attachments. See: Body and Frame/Lock Carrier/Service and Repair/Procedures
-
Place torque support on rubber buffer for torque support and tighten bolts - arrows -.
-
Install front bumper cover.
-
Fill with coolant.
-
Check headlight adjustment.
Tightening torques