audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Left Front Exhaust Pipe With Front and Main Catalytic Converter, A/T, Removing and Installing|Page 5172 > < Left Front Exhaust Pipe With Front and Main Catalytic Converter, A/T, Removing and Installing|Page 5170

S4 V8-4.2L (BHF) (2004)

Page 3
background image

-

Loosen quick-release screws - 1 -, remove screws - 2 - and remove sound insulation.

-

Remove bracket for sound insulation - arrows -.

NOTE:  Flex joint in front exhaust pipe must not be bent more than 10, otherwise it may be damaged.

-

Disconnect exhaust system at left double clamp - left arrow -.

-

Place plunger of engine/transmission jack V.A.G 1383 A with a block of wood inserted in between - arrow - beneath rear crossmember.

-

Remove bolts - 1 - and - 2 -, then bolts - 3 - and - 4 -.

Left Front Exhaust Pipe With Front and Main Catalytic Converter, A/T, Removing and Installing|Page 5172 > < Left Front Exhaust Pipe With Front and Main Catalytic Converter, A/T, Removing and Installing|Page 5170