S4 V8-4.2L (BHF) (2004)
1. Passenger-side airbag unit
CAUTION:
-
Observe safety precautions for working on airbags.
-
Note the allocation of the airbag unit to the instrument panel
-
Removing:
-
Disconnect battery Ground (GND) strap.
-
Remove glove compartment.
-
Disconnect harness connector behind airbag unit
CAUTION: Harness connector - 5 - (red, 2-pin) to passenger-side airbag unit must not be disconnected under any circumstances.
-
Remove brace behind airbag unit.
-
Remove nut - 3 - (4x).
-
Remove airbag unit.
-
Place airbag unit on a suitable surface with impact padding facing up.
-
Installation:
CAUTION: Note the allocation of the airbag unit to the instrument panel
-
Install airbag unit.
-
Make sure connector behind airbag unit completely (audibly) engages
-
Switch on ignition.
CAUTION: No person may be inside the vehicle when connecting the battery.
-
Connect battery ground (GND) strap.
NOTE:
-
Observe safety precautions after connecting battery.