S4 V8-4.2L (BHF) (2004)
Cruise Control Switch: Service and Repair
Cruise Control Switch E45, Removing And Installing
Removing
-
Remove steering column switch module.
CAUTION:
-
Ensure steering is in straight ahead and centered prior to removing spiral spring.
-
Position of spiral spring must not be changed once removed.
-
Carefully release clip fasteners - arrows - and remove spiral spring -1 - from steering column switch module.
-
Remove Steering Angle Sensor G85 -1 - from Steering Column Electronic Systems Control Module J527in direction of arrow -.
-
Remove screws - arrows -.
-
Remove Steering Column Electronics Systems Control Module J527 - 2 - from steering column switch module.
-
Remove Cruise Control Switch E45 -1 - from steering column switch module.
Installing
Further Install in reverse order of removal, noting the following:
-
Ensure all fasteners and electrical connectors are properly connected and locked into place.
-
Install steering column switch module.
Tightening torques