S4 V8-4.2L (BHF) (2004)
-
Remove securing clip -1- and clutch pedal -2-.
-
Remove bolts -3- and master cylinder -4-.
Installing
Install in reverse order, paying attention to the following:
-
Insert master cylinder and tighten bolts -3- to 20 Nm.
-
Insert mount -1- in clutch pedal.
-
Push clutch pedal in direction of arrow to lock into place, while making sure mount -1- is properly secured in clutch pedal.
-
Installing over-center spring.
For the next step a second technician is required.
-
Insert pedal cluster assembly and tighten bolt -1- hand-tight. Simultaneously, second technician feeds tube from plenum chamber side into master