S4 V8-4.2L (BHF) (2004)
/Page-2363006.png)
-
Insert master cylinder and tighten screws -3- to 20 Nm.
-
Insert retainer -1-into clutch pedal.
-
Press clutch pedal in direction of arrow to engage, make sure that retainer -1- is correctly locked in clutch pedal.
-
Install over-center spring.
A second mechanic is required for the next step.
-
Insert complete pedal cluster and install bolt -1- hand-tight. The second mechanic must simultaneously insert line into master cylinder from
plenum chamber side.
-
Tighten bolts for brake servo -arrows- to 25 Nm.
