S4 V8-4.2L (BHF) (2004)
-
Engage bracket for hose/line assembly - 3 - at slave cylinder - 4 -.
-
Guide slave cylinder - 1 - into opening in transmission housing keeping it as straight as possible (without tilting operating rod - arrow A -) and
insert in recess - arrow B - on clutch release lever - 3
-
Use new hexagon socket head bolt - 2 - to secure to transmission.
Note:
^
If the slave cylinder - 1 - is inserted at an angle, there is a danger that the operating rod - arrow A - will be guided past the clutch release lever -
3 -.
-
Tighten bolt - arrow - to specified torque.
-
If the line-hose assembly was disconnected at the slave cylinder, the clutch system has to be bled after installing slave cylinder.
CAUTION: After installing the slave cylinder carefully press the clutch pedal. If you feel an unusually strong point of resistance when depressing