S4 V8-4.2L (BHF) (2004)
Clutch Slave Cylinder: Service and Repair
[01X] 6-SPD FWD
Clutch Slave Cylinder
Special tools, testers and auxiliary items required
-
Hose Clamps Up to 25 mm Dia. (3094)
-
Lithium Grease (G 052 150 A2)
-
Commercially Available Copper Grease
Removing
-
Refer to Clutch Master and Slave Cylinder, Testing Function.
-
Brake fluid must not come into contact with transmission. If necessary, clean transmission housing.
CAUTION! If the clutch slave cylinder is removed from transmission with pipe/hose line still connected, do not depress the clutch pedal. Otherwise, the
pistons are pushed out of the clutch slave cylinder and will get damaged.
Vehicles with V6 gasoline engine:
-
Remove rear engine cover - arrows -.
-
Remove left cover - 1 - in engine compartment.