S4 V8-4.2L (BHF) (2004)
-
Do not press clutch pedal after clutch slave cylinder has been removed.
-
Clamp the pipe/hose line with a (3094).
-
Release the retaining clip - A - with a screwdriver and pull it all the way out.
-
Remove the pipe/hose line from the clutch slave cylinder.
Installing
-
Install in reverse sequence; note the following points: Replace the bolt.
-
Preload the clutch slave cylinder sufficiently so that the bolt can be easily inserted.
-
Coat the area - a - around the boot with lithium grease (G 052 150 A2) before installing the clutch slave cylinder into the transmission housing.