S4 V8-4.2L (BHF) (2004)
/Page-2431001.png)
Flywheel: Specifications
0A3, 6 SPD. M/T AWD
Clutch with SAC pressure plate (LuK version), servicing, 0A3, 6 Spd. M/T AWD
1 - Dual-mass flywheel
2 - Needle bearing
3 - Bolt for flywheel
^
Replace
^
Bolt length: 22.5 mm; 60 Nm + 90° further
^
Bolt length: 43 mm; 60 Nm + 180° further
4 - Clutch plate
^
Installation position: Clutch lining must make full contact with flywheel
^
The marking Transmission end (transmission side), if provided, faces towards pressure plate/transmission.
^
Coil springs (damper assembly) point towards pressure plate and transmission
5 - SAC pressure plate
6 - Bolt, 22 Nm
