S4 V8-4.2L (BHF) (2004)
Back Window Glass: Service and Repair
Assembly Overview
Assembly Overview
1
-
Rear window
-
When installing, note direction of joint - arrow - in magnified area of illustration.
-
After inserting window, pull up to dimension - a - = 6.5 mm at roof.
-
Align window at sides.
2
-
Adhesive end profile
-
Adhere next to vertical rear window defrosting strips
-
Adhesive must not touch distributing wire for rear window defroster.
3
-
Adhesive bead
-
Note varying spacing dimensions to window edge.
-
The dimensions - b - and - c - are achieved when you allow the application nozzle to touch each inner edge of the molding.
-
The distance to lower window edge dimension - d - is 15 mm.
-
Bead cross section
-
Bead width = 8 ± 2 mm
-
Bead height = 13.5 ± 1.5 mm
4
-
Spacers
-
Note different heights for standard glass and tinted glass.
-
Place spacers at distance of 3 mm to lower window edge onto markings applied in ceramic screen printed area.