S4 V8-4.2L (BHF) (2004)
-
Move spooling tool as shown in diagram and attach relay pulley in upper corner of window.
-
Route cutting cord as shown.
-
Insert protective foil V.A.G 1474/11 between windshield and molded headliner.
-
Cut adhesive up to point where cord no longer runs in relay pulley.
-
Remove relay pulley and continue to cut adhesive.
-
Repeat these steps in top left and bottom left corners of windshield.
-
Cut window completely free.
-
Remove window using two double suction cups.