S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
1
Door handle
2
Clip
‹› When disassembling door handle - 1 -, unclip operating rod - 3 - here.
3
Operating rod
‹› Before removing door handle, disengage at clip - 2 -.
‹› After installing a new door lock, first replace operating rod in release lever slide - 4 - and engage catches - 5 -.
4
Release lever
‹› To engage operating rod- 3 - engage retainer in - direction of arrow -on release lever catches - 5 - => [ Engaging operating rod in door lock ]
5
Catches
‹› Release lever retainer must engage cleanly in catches.
6
Door lock
‹› Removal => [ Front Door Handle and Lock Assembly Overview ] See: Front Door Handle and Lock Assembly Overview.
7
Striker pin
Engaging operating rod in door lock