S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
Carpet: Service and Repair
Floor Covering, Assembly Overview
Floor Covering, Assembly Overview
1
-
Floor mat
Removing
-
Remove front seats.
-
Remove rear seat backrest.
-
Remove rear bench seat.
-
Remove sill panel trims.
-
Remove lower A-pillar trims.
-
Remove foot rest.
-
Remove foot rest holder.
-
Remove center console.
-
Detach wiring harness under center console..
-
Remove bolts (2x) at air ducts - 2 - (2x) and remove both air ducts - 2 - (2x).
-
Unscrew bolts - 3 - (2x).
-
Fold floor mat - 1 - length ways and remove floor mat - 1 - from vehicle.
Installing
NOTE: Floor covering is liable to tear slightly at cut-outs. Install floor mat carefully.
-
Install floor mat - 1 - in reverse order of removal.
2
-
Air ducts (2x)
3
-
Bolts (2x)