S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
Glove Compartment: Service and Repair
Glove Compartment (Vehicles With Knee Bolster), Assembly Overview
Glove Compartment (Vehicles With Knee Bolster), Assembly Overview
1
-
Instrument panel
2
-
Instrument panel cover, right
-
Removing
3
-
Glove compartment
Removing
-
Remove instrument panel cover - 2 -.
-
Open glove compartment lid.
-
Remove three bolts - 4 - in recesses at top of glove compartment - 3 -.
-
Remove bolts - 5 - (2x) from underneath (footwell).
-
For vehicles with CD changer - 8 - : Remove bolt - 6 -.
-
Remove bolts - 9 -.
-
Vehicles with insulation box: Screw out vent.
-
Pull out glove compartment downward.
-
Disconnect connector - 7 - of glove compartment light.
-
Disconnect connectors to electrical components in glove compartment (if applicable).
4
-
Bolts (3x)
-
Tightening torque 3.5 Nm
5
-
Bolts (2x)
-
Tightening torque 3.5 Nm
6
-
Bolt
-
Tightening torque 5 Nm
-
Only for vehicles with CD changer