S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
Lock Carrier: Procedures
Lock Carrier Service Position
Lock Carrier Service Position
Special tools, testers and auxiliary items required
‹› Support Tool (3369)
‹› Do not remove noise insulation, only loosen front quick release screws => [ (Item 1) Quick release screw ] See: Sound Proofing /
Insulation/Service and Repair/Noise Insulation Panel Assembly Overview.
-
Remove bumper => [ Front Bumper, from MY 2006 ] See: Bumper/Front Bumper/Service and Repair/Front Bumper, From MY 2006.
-
Remove engine cover - 2 - and - 3 -.
-
Unscrew intake air duct between lock carrier and air cleaner housing at lock carrier and remove.
-
Install Support Tool (3369) at left and right as shown.