S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
-
Disconnect hoses from hydraulic oil line.
-
Unscrew power steering line for power-assisted steering on lock carrier.
‹› The power steering oil cooler line must not be bent under any circumstances.
-
For cars with automatic transmission, disconnect lines to ATF-cooler.
-
On vehicles with charge air cooler, loosen bolts on hose clamps - arrows -.
-
Disconnect hoses.
-
Remove gasket for left and right front flap at juncture of fender at lock carrier => [ (Item 1) Lock carrier ] See: Lock Carrier With Attachments
Assembly Overview.
-
Remove upper lock carrier bolts => [ (Item 5) Screw ] See: Lock Carrier With Attachments Assembly Overview.
‹› A second technician will be needed to hold the lock carrier.
-
Remove bolt => [ (Item 4) Screw ] See: Lock Carrier With Attachments Assembly Overview.
-
Pull lock carrier toward front.
Installing
Installation is reverse of removal.
-
Bleed cooling system.
Tightening torques => [ Lock Carrier with Attachments Assembly Overview ] See: Lock Carrier With Attachments Assembly Overview.