S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
Cowl Moulding / Trim: Service and Repair
Cowl Panel Trim
1
Cowl panel trim
‹› Removing:
-
Remove wiper arms
-
Remove plenum chamber cover.
-
Remove securing pins => [ (Item 4) Securing pin ]
-
Remove trim from retaining strip at windshield, bottom.
-
Remove trim upward.
‹› When installing, make sure that the trim engages completely into retaining strip.
2
Support
3
Windshield
4
Securing pin
5
Plenum chamber cover
‹› Remove gasket => [ (Item 6) Gasket ] and remove cover from cowl panel trim.