S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
With two cables attached:
-
Insert the screwdriver into the release opening.
-
Push the screwdriver in the direction of "center adjustment ".
-
Keep the screwdriver in this position and slowly operate parking brake lever.
‹› Make sure that the cable eyelets do not come off the hooks.
-
Remove the screwdriver.
-
Unhook the parking brake cables.
With one cable attached:
-
Release the mechanism with a screwdriver - 2 -, at the same time pressing back the second spring loaded hook - 1 - with another screwdriver.
-
Remove the collar nuts - 1 -. (Nut tightening specification: 25 Nm).
-
Disconnect the parking brake contact switch.
-
Remove the parking brake lever - 2 - from the plate.