S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
Camshaft: Service and Repair
Camshafts
‹› Here, removal and installation at right cylinder head is depicted in the following description.
Removing
-
Remove engine. Refer to: Vehicles with manual transmission => [ Engine, Manual Transmission, Removing ] See: Service and Repair/Removal
and Replacement/Engine, Manual Transmission, Removing, vehicles with automatic transmission => [ Engine, Removing ] See: Service and
Repair/Removal and Replacement/Engine, Automatic Transmission, Removing and Installing.
-
Disconnect engine and transmission. Refer to: Vehicles with manual transmission => [ Engine and Transmission, Separating ] See: Service and
Repair/Removal and Replacement/Engine, Manual Transmission, Removing, vehicles with automatic transmission => [ Engine and Transmission,
Separating ] See: Service and Repair/Removal and Replacement/Engine, Automatic Transmission, Removing and Installing.
-
Remove camshaft timing chains from camshafts. Refer to => [ Camshaft Timing Chains, Removing from Camshafts ] See: Timing
Components/Timing Chain/Service and Repair/Camshaft Timing Chains, Removing From Camshafts.
-
Remove housing for camshaft adjustment solenoid valves - arrows -.
-
Remove diamond disc from the cam shaft.
-
Remove bearing caps - 1 -, - E3 -, - E5 -, - A3 - and - A5 -.
-
Remove oil deflector - arrow -.
-
Loosen and remove bearing caps - E2 -, - E4 -, - A2 - and - A4 - for intake and exhaust camshafts, alternating and in diagonal sequence.