S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
/Page-808003.png)
Installing
‹› Replace seals and O-rings.
-
Remove A/C compressor drive seal - 2 - and power steering pump drive seal - 3 - using pulling hook (T20143/1).
-
Remove O-ring - 1 -.
-
Remove sealant residue on spur gear unit and cylinder block.
-
Clean sealing surfaces so they are completely free of any oil or grease.
-
Drive in sealing ring for A/C compressor drive using thrust piece (T40051).
