S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
Intake Manifold: Service and Repair
Intake Manifold
Intake Manifold
Removing
‹› All cable ties opened or cut during engine removal must be reinstalled at the same locations during installation.
-
Bring lock carrier into service position. Refer to => [ Lock Carrier, Moving into Service Position ] See: Service and Repair/Removal and
Replacement/Lock Carrier, Moving Into Service Position.
-
Remove rear engine cover - arrows -.
-
Remove front engine cover - arrows 1 and 2 -.
-
Disconnect vacuum line - arrow - to brake booster at bulkhead.