S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
‹› Inner part and outer part must not be able to be against each other in lock position (slight play can still be felt).
-
Check whether camshafts of both cylinder heads stand in TDC position.
‹› Slits - arrows - at front in camshafts must stand parallel at same height with upper edge of cylinder head.
-
Insert camshaft locator (T40046) into camshafts of left cylinder head, to do so rotate camshafts back or forth at hex head if necessary.
-
Insert camshaft locator (T40046) into camshafts of right cylinder head, to do so rotate camshafts back or forth at hex head if necessary.