S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
-
Tighten camshaft bolt - 1 - on exhaust camshaft of left cylinder head to final tightening specifications.
‹› Tightening Specifications: 100 Nm plus an additional 90° ( 1/4 turn).
-
Secure Hall sensor wheel on camshaft adjuster of intake camshaft of left cylinder head using setting gauge (T40047).
-
Place locator on bolt - 1 -.
-
Tighten camshaft bolt - 2 - on intake camshaft to final tightening specifications.
‹› Tightening Specifications: 100 Nm plus an additional 90° ( 1/4 turn).