S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
/Page-915015.png)
-
Remove crankshaft holder (3242).
-
Screw sealing plug of TDC marking with new sealing ring into upper section of oil pan.
The rest of installation is in reverse order of removal, note the following:
-
Install covers for timing chains => [ Installing ] See: Timing Cover/Service and Repair/Timing Chain Covers.
-
Install engine. Refer to: Vehicles with manual transmission => [ Engine, Installing ] See: Service and Repair/Removal and Replacement/Engine,
Manual Transmission, Removing, vehicles with automatic transmission => [ Engine, Installing ] See: Service and Repair/Removal and
Replacement/Engine, Automatic Transmission, Removing and Installing.
-
Add engine oil and check oil level. Refer to => [ Oil Level, Checking ] See: Engine Lubrication/Testing and Inspection.
Tightening Specifications
*
90° corresponds to one quarter rotation.
*
Replace bolts.
