S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
/Page-922006.png)
-
Loosen hose clamps - arrows - and remove left coolant pipe from coolant hoses.
-
Remove bolts - 1 - and - 2 -.
-
Loosen hose clamps - arrows - and remove right coolant pipe from coolant hoses.
-
Disconnect electrical connector - 2 - on the Engine Coolant Temperature (ECT) Gauge Sensor (G2)/ (G62).
-
Remove nut - 1 - and remove electrical wiring harness at rear coolant pipe.
-
Remove bolts - 2 to 5 -.
