S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
-
Tighten screw - A - with 10 Nm (screws with an M6 thread) and to 25 Nm (screws with an M8 thread).
‹› First tighten screws - B - and then secure clamp - C - with screw - A -.
‹› Do not use the O-rings from the shipping caps that are installed on the connections of replacement compressor when installing lines.
‹› Following attachment of refrigerant lines - A -, check the routing of the lines. They must be inserted in the provided holders - B - and may not
come into contact with other components.